Archery Full-Draw Anchor & Draw-Elbow Alignment Protractor
Inspect draw-elbow elevation, bow-shoulder stability, and release follow-through hands-free on the shooting line.
Archery 120 fps preset Delay -10s Draw Forearm Plane Alignment: 175 deg to 180 deg arrow-to-elbow line
TRACKSIDE FIELD WORKBENCH
Live local math matching the MirrorSplit iOS engine: zero login, zero cloud upload.
Camera Frame Rate
| Scrub Speed | Playback Duration | Frames per Real Sec |
|---|---|---|
| 0.125x | 1.600 s | 15.0 fps |
| 0.25x | 0.800 s | 30.0 fps |
| 0.5x | 0.400 s | 60.0 fps |
| 1x | 0.200 s | 120.0 fps |
MEASURED INTERVAL
200.0ms
24 frames @ 120 fps (8.33 ms/frame)
- DURATION (SEC)
- 0.2000 s
- CYCLE RATE
- 5.00 Hz
- SHUTTER FLOOR
- 1/480 s
- UNCERTAINTY
- +/-4.17 ms
Tripod placement and coaching checklist
CAMERA PLACEMENT
Side profile at shoulder height 3 meters from shooting line, plus overhead line checks.
TARGET BENCHMARK
175 deg to 180 deg arrow-to-elbow line
- Set a 10-second live delay so you release an arrow, hold follow-through, and inspect alignment automatically.
- Draw a reference plane straight through arrow shaft into the draw-elbow point.
- Scrub 120 fps frames around release to spot bow-arm drop or plucking.
Frame-to-millisecond reference table
| Movement Phase | Frame Window | Target Value | Primary Cue |
|---|---|---|---|
| Full Draw Anchor | Anchor -12f @ 120fps | Flat bow shoulder | Transfer load into back rhomboids |
| String Release | 0.0 ms anchor | Clean rearward elbow travel | Zero lateral pluck away from jaw |
| Follow-Through Hold | +24f @ 120fps | 200 ms steady bow arm | Bow stays on target line after arrow exit |
Common trackside questions
Can I compare first-end arrows against final-end fatigue?
Yes: load End 1 as Clip A and End 10 as Clip B in Dual Split-Screen and sync both at string release.