Sprint Ground Contact & Flight Timing at 120 fps
Measure upright sprinting contact and flight intervals at crisp 1080p 120 fps (8.33 ms per frame) for indoor tracks and twilight turf.
Track & Field 120 fps preset Delay -12s 120 fps Contact / Flight Ratio: 100 ms to 125 ms contact
TRACKSIDE FIELD WORKBENCH
Live local math matching the MirrorSplit iOS engine: zero login, zero cloud upload.
Camera Frame Rate
| Scrub Speed | Playback Duration | Frames per Real Sec |
|---|---|---|
| 0.125x | 0.867 s | 15.0 fps |
| 0.25x | 0.433 s | 30.0 fps |
| 0.5x | 0.217 s | 60.0 fps |
| 1x | 0.108 s | 120.0 fps |
MEASURED INTERVAL
108.3ms
13 frames @ 120 fps (8.33 ms/frame)
- DURATION (SEC)
- 0.1083 s
- CYCLE RATE
- 9.23 Hz
- SHUTTER FLOOR
- 1/480 s
- UNCERTAINTY
- +/-4.17 ms
Tripod placement and coaching checklist
CAMERA PLACEMENT
Tripod 6 meters perpendicular to lane, full-body framing covering two complete strides.
TARGET BENCHMARK
100 ms to 125 ms contact
- Use 1080p 120 fps under indoor track LED lighting to keep image grain low while maintaining 8.33 ms resolution.
- Set Sync Anchor A on touchdown of Rep 1 and Anchor B on touchdown of Rep 2.
- Compare shin angle at touchdown using the 3-point angle goniometer.
Frame-to-millisecond reference table
| Movement Phase | Frame Window | Target Value | Primary Cue |
|---|---|---|---|
| 11 frames @ 120 fps | 11 frames | 91.7 ms | High-stiffness upright contact |
| 14 frames @ 120 fps | 14 frames | 116.7 ms | Solid tempo / sub-max sprint |
| 18 frames @ 120 fps | 18 frames | 150.0 ms | Early acceleration push phase |
Common trackside questions
When should I pick 1080p 120 fps over 720p 240 fps?
Pick 1080p 120 fps indoors or under stadium lights where extra resolution and light gathering beat 720p 240 fps grain.