Barbell Path Verticality & Plumb Deviation for Squats and Cleans
Drop a true vertical plumb reference over the midfoot to audit squat descent drift, deadlift setup, and Olympic clean bar proximity.
Strength & Lifting 60 fps preset Delay -10s Barbell Plumb Deviation: < 3.5 deg from midfoot vertical
TRACKSIDE FIELD WORKBENCH
Live local math matching the MirrorSplit iOS engine: zero login, zero cloud upload.
Camera Frame Rate
| Scrub Speed | Playback Duration | Frames per Real Sec |
|---|---|---|
| 0.125x | 6.400 s | 7.5 fps |
| 0.25x | 3.200 s | 15.0 fps |
| 0.5x | 1.600 s | 30.0 fps |
| 1x | 0.800 s | 60.0 fps |
MEASURED INTERVAL
800.0ms
48 frames @ 60 fps (16.67 ms/frame)
- DURATION (SEC)
- 0.8000 s
- CYCLE RATE
- 1.25 Hz
- SHUTTER FLOOR
- 1/250 s
- UNCERTAINTY
- +/-8.33 ms
Tripod placement and coaching checklist
CAMERA PLACEMENT
Strict 90-degree side profile aligned with barbell sleeve end cap at hip height.
TARGET BENCHMARK
< 3.5 deg from midfoot vertical
- Use a 10-second live delay so you rack the bar and immediately review your set hands-free.
- Place a vertical plumb vector directly through the barbell center over mid-foot.
- Check knee and torso angle at bottom turnaround using the 3-point angle gauge.
Frame-to-millisecond reference table
| Movement Phase | Frame Window | Target Value | Primary Cue |
|---|---|---|---|
| Back Squat Descent | 72 to 110 frames | 1.2 to 1.8 s tempo | Bar sleeve tracks inside 2 cm of midfoot line |
| Clean First Pull | 26 to 34 frames | 433 to 567 ms | Constant back angle from floor to knee |
| Turnover & Catch | 14 to 19 frames | 233 to 317 ms | Fast elbow whip with minimal forward loop |
Common trackside questions
Is 60 fps enough for barbell lifting?
Yes: 1080p 60 fps delivers 16.7 ms precision with bright indoor gym clarity while keeping chunk disk usage compact.