MirrorSplit

iPad Trackside Field Monitor Buffer & Split-Screen Setup

Turn an iPad into a dedicated dual-column coaching console with live delay video on the left and frame telemetry controls on the right.

Hardware & Setup 60 fps preset Delay -12s Disk Ring Budget (12s): 24.5 MB temporary ring at 1080p60

TRACKSIDE FIELD WORKBENCH

Live local math matching the MirrorSplit iOS engine: zero login, zero cloud upload.

Camera Frame Rate
F0
F60
Scrub SpeedPlayback DurationFrames per Real Sec
0.125x8.000 s7.5 fps
0.25x4.000 s15.0 fps
0.5x2.000 s30.0 fps
1x1.000 s60.0 fps

MEASURED INTERVAL

1000.0ms

60 frames @ 60 fps (16.67 ms/frame)

DURATION (SEC)
1.0000 s
CYCLE RATE
1.00 Hz
SHUTTER FLOOR
1/250 s
UNCERTAINTY
+/-8.33 ms

Tripod placement and coaching checklist

CAMERA PLACEMENT

Landscape iPad clamp on heavy tripod at chest height, clear of athlete runway.

TARGET BENCHMARK

24.5 MB temporary ring at 1080p60

  1. Rotate iPad to landscape for MirrorSplit dual-column layout (large monitor stage + right control rail).
  2. Use Freeze Frame and -1f / +1f buttons when an athlete walks over to review a standout rep.
  3. Export Key-Frame PDF directly via AirDrop with zero Wi-Fi required.

Frame-to-millisecond reference table

Movement Phase Frame Window Target Value Primary Cue
720p 60 fps (12s buffer) 720f offset 14.0 MB disk / ~81 MB RAM Best battery life for 3-hour clinics
1080p 60 fps (12s buffer) 720f offset 24.5 MB disk / ~100 MB RAM Balanced daily coaching default
1080p 120 fps (20s buffer) 2400f offset 66.0 MB disk / ~119 MB RAM High-speed sharp detail under 180 MB cap

Common trackside questions

Does the iPad need cellular service for MirrorSplit?

No: live delay buffering, dual comparison, telestrator angles, and PDF/MP4 exports run 100% locally offline.

Related biomechanics calculators