MirrorSplit

Olympic Lift Triple-Extension Knee & Hip Angle Checker

Verify full knee, hip, and ankle extension timing at the power position in snatches and cleans at 120 fps.

Strength & Lifting 120 fps preset Delay -10s Peak Extension Knee Angle: 164 deg to 176 deg at peak drive

TRACKSIDE FIELD WORKBENCH

Live local math matching the MirrorSplit iOS engine: zero login, zero cloud upload.

Camera Frame Rate
F40
F62
Scrub SpeedPlayback DurationFrames per Real Sec
0.125x1.467 s15.0 fps
0.25x0.733 s30.0 fps
0.5x0.367 s60.0 fps
1x0.183 s120.0 fps

MEASURED INTERVAL

183.3ms

22 frames @ 120 fps (8.33 ms/frame)

DURATION (SEC)
0.1833 s
CYCLE RATE
5.45 Hz
SHUTTER FLOOR
1/480 s
UNCERTAINTY
+/-4.17 ms

Tripod placement and coaching checklist

CAMERA PLACEMENT

Side profile 3.5 meters from platform center, wide framing including overhead lockout.

TARGET BENCHMARK

164 deg to 176 deg at peak drive

  1. Lock Anchor Frame at peak bar height or heel rise before foot relocation.
  2. Measure hip-knee-ankle vertex angle to detect early arm bend or cut pull.
  3. Compare lighter warm-up rep against working weight using Ghost Overlay.

Frame-to-millisecond reference table

Movement Phase Frame Window Target Value Primary Cue
Power Position (Knee Re-bend) Anchor -16f 132 to 144 deg knee Balanced midfoot pressure, shoulders over bar
Peak Triple Extension 0.0 ms anchor 166 to 176 deg knee Vertical drive before pulling under
Receiving Bottom Anchor +24f 55 to 75 deg deep knee Active torso braced directly under bar

Common trackside questions

Can I compare a 60 fps lift against a 120 fps lift?

Yes: MirrorSplit syncs clips in milliseconds around each clip anchor frame so mixed frame rates scrub in lockstep.

Related biomechanics calculators