MirrorSplit

Rowing Erg & On-Water Drive-to-Recovery Ratio Frame Timer

Calculate exact catch-to-finish drive time vs recovery ratio and shin verticality on the ergometer using 60 fps local video.

Rowing 60 fps preset Delay -8s Drive : Recovery Ratio: 1 : 1.8 to 1 : 2.2 steady state

TRACKSIDE FIELD WORKBENCH

Live local math matching the MirrorSplit iOS engine: zero login, zero cloud upload.

Camera Frame Rate
F12
F56
Scrub SpeedPlayback DurationFrames per Real Sec
0.125x5.867 s7.5 fps
0.25x2.933 s15.0 fps
0.5x1.467 s30.0 fps
1x0.733 s60.0 fps

MEASURED INTERVAL

733.3ms

44 frames @ 60 fps (16.67 ms/frame)

DURATION (SEC)
0.7333 s
CYCLE RATE
1.36 Hz
SHUTTER FLOOR
1/250 s
UNCERTAINTY
+/-8.33 ms

Tripod placement and coaching checklist

CAMERA PLACEMENT

Strict side profile centered on ergometer rail at seat height, 3 meters away.

TARGET BENCHMARK

1 : 1.8 to 1 : 2.2 steady state

  1. Count frames from catch direction reversal to handle finish at ribs (drive phase).
  2. Count frames from finish back to next catch (recovery phase) and divide recovery by drive.
  3. Use the plumb line tool at catch to verify shins stop at vertical without over-compressing.

Frame-to-millisecond reference table

Movement Phase Frame Window Target Value Primary Cue
Steady State (20 spm) 54f drive / 126f rec @ 60fps 0.90s : 2.10s (1:2.3) Patient controlled slide forward
Race Pace (32 spm) 42f drive / 70f rec @ 60fps 0.70s : 1.17s (1:1.7) Explosive leg drive before hip swing
Catch Shin Angle 0.0 ms anchor 0 to 4 deg plumb Shins vertical, shoulders relaxed in front of hips

Common trackside questions

Why check ergometer form with a live 8-second delay?

Watching your own catch sequencing 8 seconds later lets you correct early arm pull or rushing the slide during the very next interval.

Related biomechanics calculators