Distance Running Cadence, Overstride & Shin Angle at 120 fps
Audit foot-strike shin angle relative to vertical plumb and measure contact vs flight ratio on treadmill or track at 120 fps.
Running 120 fps preset Delay -8s Initial Contact Shin Angle: 0 deg to 8 deg from vertical plumb
TRACKSIDE FIELD WORKBENCH
Live local math matching the MirrorSplit iOS engine: zero login, zero cloud upload.
Camera Frame Rate
| Scrub Speed | Playback Duration | Frames per Real Sec |
|---|---|---|
| 0.125x | 1.733 s | 15.0 fps |
| 0.25x | 0.867 s | 30.0 fps |
| 0.5x | 0.433 s | 60.0 fps |
| 1x | 0.217 s | 120.0 fps |
MEASURED INTERVAL
216.7ms
26 frames @ 120 fps (8.33 ms/frame)
- DURATION (SEC)
- 0.2167 s
- CYCLE RATE
- 4.62 Hz
- SHUTTER FLOOR
- 1/480 s
- UNCERTAINTY
- +/-4.17 ms
Tripod placement and coaching checklist
CAMERA PLACEMENT
Side profile at knee height, 3 meters from treadmill belt or track lane.
TARGET BENCHMARK
0 deg to 8 deg from vertical plumb
- Drop a vertical plumb vector from the knee joint straight down at initial foot strike.
- Measure shin deviation in degrees to spot braking overstride immediately.
- Compare baseline cadence vs +5% cadence drill side-by-side with Ghost Overlay.
Frame-to-millisecond reference table
| Movement Phase | Frame Window | Target Value | Primary Cue |
|---|---|---|---|
| Initial Foot Contact | 0.0 ms anchor | 0 to 8 deg plumb shin | Land close to center of mass |
| Mid-Stance Load | +11 to +14f @ 120fps | 140 to 150 deg knee | Stable pelvis without hip drop |
| Ground Contact Total | 22 to 29f @ 120fps | 183 to 242 ms | Quick elastic turnover |
Common trackside questions
Can I use MirrorSplit live delay right next to a treadmill?
Yes: mount the iPhone beside the treadmill with a 5-second delay so you adjust form cues while jogging and verify in real time.